The main parts of the vending machine that need maintenance are: machine body surface, pick-up port, paper coin identifier, shipping chute, condenser, and evaporating dish.
External vending machine
The so-called people rely on the saddle horse, the vending machine is the same, the good and clean external environment can attract more passengers to a certain extent. When the outside of the machine is covered with dust, we only need to wipe it with a dry rag. If it can’t be wiped off, we need to scrub the outside of the vending machine with warm water or diluted with neutral detergent. In addition, chemicals such as paint solvents and banana water should not be used, otherwise accidents may occur.
Goods shipping chute
The merchandise’s shipping chutes are kept clean in order to make the merchandise more unobstructed when it debuts. Therefore, the cleaning time should be at least once a month to remove the stains or dust on the top, so that the consumer can buy back again.
Vending machine condenser and evaporator
The outside of the machine needs to be cleaned regularly, and the parts inside the machine need to be properly cleaned. Such as condensers and evaporators. When cleaning the condenser, use a vacuum cleaner or a brush to gently move the dirt or dirt attached to the heat sink in the up and down direction. When cleaning the dirt inside the evaporator, remove it and wash it with water.
Vending machine coin or bill validator
Coins and banknotes are more likely to be contaminated with dust. When dusty coins pass through the vending machine coin channel, over time, the channels will be dirty. If the residual dust or stains are serious, it will lead to the vending machine. The performance of coin selection, change, and withdrawal of coins is abnormal. Therefore, like the other machines mentioned above, scrub at least once a month, and moisten the rag with water when scrubbing.
